Skip to content

.750 Adjustable Gas Block

(1 customer review)

$36.70

Low-profile Adjustable .750 diameter gas block, set screw style, black nitride

Our AR-chitect AR15 FOUNDATION SERIES gas blocks are designed to be slim and
light weight.

American made from American sourced 4140 pre-heat treated steel.

.750 diameter set screw style. If your barrel is not pre-dimpled, we recommend the use of a gas block alignment tool

8-32 set screw adjustment from muzzle end of block requires a 5/64 allen wrench…. 4-40 locking set screw requires a .050 allen wrench.

We recommend the use of lok-tite thread locker on both set screws during installation.

4140 gas blocks are black nitrided not phosphated for the best look and finish.

100% warranty against any and all manufacturers defects. If we missed something we will replace it at
no cost to you.

33 in stock (can be backordered)

SKU: 13115-34 Categories: ,

Low-profile Adjustable .750 diameter gas block, set screw style, black nitride coated.

Our AR-chitect AR15 FOUNDATION SERIES gas blocks are designed to be slim and
light weight.

American made from American sourced 4140 pre-heat treated steel.

.750 diameter set screw style. If your barrel is not pre-dimpled, we recommend the use of a gas block alignment tool.

We recommend the use of lok-tite thread locker on both set screws during installation.

4140 gas blocks are black nitride coated not phosphate coated for the best look and finish.

100% warranty against any and all manufacturers defects. If we missed something we will replace it at
no cost to you.

1 review for .750 Adjustable Gas Block

  1. Bob Shrader

    Very well made adjustable gas block. Fit was precise and install was quick and easy. This has to be one of the most compact adjustable gas blocks I have seen. It easily fit inside the m-lok hand guard on my AR pistol. My only complaint, if you could call it a complaint, is I’d prefer a full, or nearly full, cut-off when the adjustment screw is bottomed out.

Add a review

Your email address will not be published. Required fields are marked *